Gorodok
The Gorodok (skittles) is made of wood in the form of a cylinder length of 200 ± 1 mm and a diameter of 45-50 mm. The ends of the Gorodok may have a chamfer 2-3 mm and be smooth. The Gorodok (skittles) can be painted.
Bat
The bat is a cone-shaped round rod, the length of the bits - 90 cm, diameter bits (the base of the cone) - 3,5 cm, diameter bits (the top of the cone) - 3 cm
Sporting a bit of a circular rod of length not more than a meter, arbitrary weight and diameter. Bita is collected from the inserts, bushings, terminal cups and pens.
It is recommended to produce inserts of wood laminate or dogwood. Pens - from textolite rods or Cornelian cherry, bush - from seamless steel pipes. Inserts must be tightly connected to the sleeves and secured kerneniem or other means of fastening. The distance between the sleeves should not be less than the diameter of the insert. The length of the sleeves should not be less than two diameters of the insert. The distance from the edge of the hub to the point of attachment of 10-15 mm (excluding mounting handles). Components should not have reciprocal movements. For mass competitions allowed bits of hardwood of any design, ensuring security.
Gorodoshnaya playground and its equipment.
Gorodoshnaya playground equipped on a flat horizontal section of size 26 (22) x 15 (12) meters Partitioning "cities" and "suburbs" is based on metal sheets or sheets of polycarbonate injection - to play the constituent bits. To play with polymer or wooden bats counting is performed on any solid (non-abrasive) surface.
Metal or polycarbonate sheets to cover an area of not less than 8,0 x 3,2 m. The surface of the "urban" and "suburbs" must be strictly horizontal (round Gorodki (skitles), quiet position, anywhere "Gorodki (skitles)" or "suburb", should not spontaneously roll in any direction in the absence of any impact on him - the wind, shaking platform).
Equipment gorodoshnoy site:
- Metal or polycarbonate sheets on which the paint put the line "cities" and "suburbs". The thickness of sheet metal - 10 mm, Material - Steel 3 SP. Optimal width of sheets 1.3 1.5 m. Leaves are placed in such a way that their joint strictly coincide with the center line of the Gorodki (skitles) and suburbs. The joint was placed on the lower sheet corner shelf steel 75x50x8. The optimum thickness of polycarbonate sheets - 4 mm. Standard dimensions - 3,05 x 2,05 m.
- Fender wall (mesh and rubber curtain);
- Fencing;
- Lighting for night games;
- Fixed strip 50 mm on the front lines Konov and polukonov;
- Canopies to shelter the players and the Secretary of precipitation; desirable equipment total canopy over the "cities", "suburbs" and a pneumatic wall.
Polycarbonate sheets are placed on a sturdy flat surface. We recommend the use of polycarbonate sheets in the sports halls, and be marked on the surface on which the stacked sheets. The layout can be applied to the nylon fabric in black, spread out under the sheets. Polycarbonate sheets used on the street should have a protective layer against UV rays.
At the metal sheets zone "cities" and "suburb" is recommended to paint primer on the metal red-brown color.
Equipment playgrounds for polymer-coated bits differs only "urban" and "suburbs".
"Gorodki (skitles)" - a zone that has a square with sides 2 m, within which are set pieces "Suburb" - a zone, located between the front and kick lines, bounded laterally continuations diagonals "Gorodki (skitles)". At the center of the "suburbs" at a distance of 20 and 40 cm from the foul line causing two marks 20 cm long to install them fine Gorodki (skitles)s.
A penalty line and the area located in front of her, called the penalty area. It is covered with sand or cover with chalk from the water suspension.
The area bounded by two lateral lines and the front bar, from within which the shots on the figures is called by law. The distance from strip Kona to the front lines - 13 m (for adults) and 6.5 m (for children and adolescents under 15 years).
The area bounded by the sidelines, the front bar and rear bar Cohn, of the limits of which are made free throws after the ejection of at least one Gorodki (skitles) (except for the figures "Letter"), is called polukonom. Distance from the front strap to the front lines polukona - 6.5 m
Surface Konov and polukonov should be sufficiently strong, excluding slip shoes. The most preferred coatings are asphalt or special synthetic coating. Asphalt on konah and polukonah recommended to paint in a red-brown color.
In conducting competitions in unsuitable for Gorodki gym or on the non-specialist sports fields restrictive straps on the front lines marking Kohn and polukona can not be recorded.
The lateral line and Kon polukona must be strictly opposite side lines of "Gorodki (skitles)" with a view of the fact that the width of the constraint lines "the Gorodki (skitles)" and the side lines of the "suburb" is included in the amount of "city", "suburb" and the width of the constraint lines in Kona and polukona dimensions of these zones is not included.
The lines marking the width of 2 cm stained with paint, contrasting with the coating.
